The Mesh Company's Nichrome 80 Resistance wire is amazingly good for rebuilding your atomizer.
It is ideal for sun ohm coil builds. Ni80 (Ni80Cr20) has a lower resistance per length compared to Kanthal (FeCrAl). Consequently it will heat up much faster. It is therefore a perferred alternatively to kanthal for many "cloud chasers". This wire is also commonly used for Hot Cutting. Melting point oC - 1350 Max continous operating temperature in the air oC - 1200.
36 GA
Nickel Chrome 80/20 (Ni80) is commonly used as a heat treatment wire.
In modern times it has found popularity n the vaping industry due to its high heat and electrical resistance.
80/20 nickel chronium alloy is often used for wrought and cast parts for high temperature applications, as it has better oxidation and hot corrosion resistance compared to cheaper iron-nickel-chromium alloys. This nickel chromium alloy is highly suited to applications that are subject to oxidation.
- Ni - Rest
- Cr - 20.0 - 23.0
- Fe - <1.0
Max Continous Service Temp Of Element - 1200
Resistivity at 20oc - 1.09
Density (g/cm3) - 8.40
Thermal Conductivity (KJ/m.g.oC) - 60.3
Coefficient of Lines Expansion - 18.0
Melting Point (approx) (oC) - 1400
Elongation at Rupture (%) - >20
Micrographic Structure - Austenite
Magnectic Properties - Nonmagnectic
Techical Specification:
- Diameter - 0.12mm
- Spool Type - Large Plastic Bobbin
- Shape - Round Wire
- Ohms/m - 96.38
38 GA
Nickel Chrome 80/20 (Ni80) is commonly used as a heat treatment wire.
In modern times it has found popularity n the vaping industry due to its high heat and electrical resistance.
80/20 nickel chronium alloy is often used for wrought and cast parts for high temperature applications, as it has better oxidation and hot corrosion resistance compared to cheaper iron-nickel-chromium alloys. This nickel chromium alloy is highly suited to applications that are subject to oxidation.
- Ni - Rest
- Cr - 20.0 - 23.0
- Fe - <1.0
Max Continous Service Temp Of Element - 1200
Resistivity at 20oc - 1.09
Density (g/cm3) - 8.40
Thermal Conductivity (KJ/m.g.oC) - 60.3
Coefficient of Lines Expansion - 18.0
Melting Point (approx) (oC) - 1400
Elongation at Rupture (%) - >20
Micrographic Structure - Austenite
Magnectic Properties - Nonmagnectic
Techical Specification:
- Diameter - 0.1mm
- Spool Type - Large Plastic Bobbin
- Shape - Round Wire
- Ohms/m - 139.87